1. Prepare the roof surface: Clean the roof surface and ensure it is flat and smooth. Remove any debris or obstructions that may interfere with the installation. 2. Measure and cut the PVC roof sheets: Measure the length and width of the roof and cut the PVC roof sheets to size using a circular saw or a jigsaw with a fine-toothed blade. 3. Install the first sheet: Start at the bottom of the roof and install the first sheet, ensuring that it is aligned with the edge of the roof. Secure the sheet with screws or nails, placing them at least 6 inches apart along the edges and every 12 inches in the center. 4. Install the remaining sheets: Continue installing the PVC roof sheets, overlapping each sheet by at least 2 inches. Use a sealant along the overlaps to prevent water from seeping through. 5. Cut and install the ridge cap: Measure and cut the ridge cap to size and install it at the peak of the roof, securing it with screws or nails. 6. Finish the edges: Install flashing along the edges of the roof to prevent water from seeping under the PVC roof sheets. 7. Inspect and seal: Inspect the roof for any gaps or holes and seal them with a waterproof sealant.
